Dr. Fixit Pidiproof LW+ is specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation.
 
Typical Application
Waterproofing of concrete and sand-cement mortars used in
Basements,
Roof slabs and screeds,
Water tanks & water retaining structures,
External plastering,
Bathrooms and balconies,
Sumps and drains
Features
Corrosion resistant - Makes concrete more cohesive, hence protects steel better against corrosion
Compatibility – Being a liquid, easily dispersible & compatible with concrete/mortar mixes.
Permeability – It reduces the permeability of water into concrete.
Strength – The setting time and compressive strength of the concrete remains within the specification limits.
Shrinkage – Reduces shrinkage crack development in plaster & concrete.
Workability – Improves workability of freshly mixed cement concrete.
Durability – Increases durability by improving waterproofing of concrete.
Packing
20 litre
Method of Application
Charge cement & aggregates to concrete mixer as per the mix design, mix in dry state for 1–2 minutes.
Start addition of 75–80% mixing water & mix for 2-3 minutes.
Dr. Fixit Pidiproof LW+ is added as per the recommended dosage into the remaining mixing / gauging water, then add to concrete mixer & mix for another 2 minutes.
Place the concrete or apply plaster, as needed.
Cure the applied mortar or concrete as per good construction practices.
Precautions & Limitations
Do not add Dr. Fixit Pidiproof LW+ directly to dry cement & aggregate mix.
Maintain water-cement ratio as low as possible.
Do not increase the dosage of Dr. Fixit Pidiproof LW+ than the recommendation.